Net tying Kit
Description
Heres a little kit for use when making nets for fishing , crafts , survival and many other uses for nets lol The metal rod is held in place with the little flat that bolts to side ( this is a just a blank hole so will need threading with a M3 tap ) The holder can be flipped over to hold net the right way for adding new rows requires M6 x 25 Hex head bolt M6 nut M3 x 8-10 bolt ( use a cap or button head ) 2mm steel rod ( 82mm long ) 2 or 4 countersink screw/bolts to hold down which bracket you use :) The M6 bolt head and nuts may be a tight fit depending on printer settings , but warming them up should make them install easier and give tight fit kit also has 3 sizes of needles and a selection of different mesh gauges for making different size nets If you want any other needles or gauges please let me know and ill add them to the thing :) Look forward to seeing the nets you make with this kit :) Follow me on Facebook and Instagram to see the things i make with them :) https://www.facebook.com/MBRCreationStation https://www.instagram.com/mbr_creation_station Use supports for the " net tying holder" as the end of the arms are tapered so dont sit flat on bed , the supports are very minimal The smallest needle does have a slot in the tip , tho it may join when printed but just snip through the join with a knife or side cutters to free it up and keep the gap tight so your thread doesnt come off the needle :)
Statistics
Likes
105
Downloads
0