Two Trees Sapphire S CR10 All Metal Hotend Carrier
Description
Carrier for CR 10 clone all metal hotend Recomend you print in PETG if you have some but PLA works fine for lower temps 200c Clear Hotend and top mount holes to 3.5mm Clear Carrage mount holes to 4mm Use the Belt Griper on the front belts and use a mirrored version of Mejon excellent Belt Tensioner for the rear. Cheap clone hotends need to be reamed before use as the bores of the body, heatbrake and nozzel are never true.
Statistics
Likes
20
Downloads
0