MG90s Dimension Reference (Measured)
Description
### The STLs are pointless (as this is for dimension reference) but seems the site mandates file of certain formats ####Why I did this: I was doing a project using MG90, and referenced the dimension by searching google Image, however, when the print is out, the form-factor is just a bit smaller. The manual/documents of MG90 seems not to have detailed dimension. There's a model [Here](https://www.thingiverse.com/thing:2641076), but it's in polygon ,so not convenient for projecting onto sketches as you'll have to reform the center of circle after projection. So I have uploaded step also for other design software. * This dimension is measured using MG90S variant, so might not be suitable for dimension reference for other variant. * As it's measured using caliper, the dimension might not be exact * Will be updated when error is found * If you find something that doesn't fit, please don't hesitate to comment, and I'll make adjustments * The holes on servo arms is too small, so the measurement using (L1+L2) / 2 method, might have significant inaccuracy. * The servo arm is not to be printed, but also as a dimension reference * The contour will be relatively more accurate * But the servo shaft teeth isn't accurate at all as I don't have a way to measure it. * If you know a way to accurately measure, please also instruct me how to do so. * Also had servo arm built because the MG90 servo arm (stock) seems to be different from the SG90 ones ( a little bigger seems ) Image reference: https://www.lelong.com.my/towerpro-mg90s-360-degree-metal-gear-servo-littlecraft-184753235-2020-10-Sale-P.htm
Statistics
Likes
21
Downloads
0