Pulley puller for removing 16t pulleys from motor shafts
Description
I designed this to remove the pulleys from the stepper motors on the Lulzbot Taz6. There are 2 versions, the first uses the long m4 threaded inserts from mcmaster. The second uses a m4 nut. Simply put the thing around the pulley and screw in the m4 screw. It is designed for maximum strength when printed with the flat side down. Source is here: https://cad.onshape.com/documents/404fb755181a8941975e28a5/w/c051c7743f5955849883b530/e/4467f020a31287e6782fd8e3
Statistics
Likes
1
Downloads
0