Flight Controller Case (Flycolor raptor S-tower 30A)
Description
This is a Flight Controller case: -For the F3 Flycolor Raptor S-Tower 30A or other FC with the same structure : -For this 3D print you will need: -8 or 12 M3 threaded spacers (I suggest in nylon/plastic). -4 M3 nuts (I suggest in nylon/plastic). -4 M3 screws (I suggest in nylon/plastic). -Print with a 0.4mm nozzle in PLA. -You might have to adjust the holes for the screws and threaded spacers. -Layer Height : 0.08mm -Print speed : 30 mm/s -Travel speed : 80 mm/s -Designed on CatiaV5 -I found the threaded spacers here : https://www.banggood.com/Suleve-M3NH1-M3-Nylon-Screw-Black-Hex-Screw-Nut-Nylon-PCB-Standoff-Assortment-Kit-300pcs-p-984310.html?rmmds=myorder&cur_warehouse=CN Enjoy !!
Statistics
Likes
3
Downloads
0