Ventilation Enclosure V2 (Multi Tools) output (espacially Prusa MMU2S)
Description
This mainly allows suction from inside your box. You will need a powerful fan of 120mmx32mm (https://fr.rs-online.com/web/p/axial-ventilators/6196517/) that fits and retracts from the small box if you want to reverse the flow. There is a screw on the inside of the box allowing to adapt different tools (here a vent with charcoal filter -https://www.instagram.com/p/Bz7vGvKoSrs/?utm_source=ig_web_button_share_sheet - or ZIMPURE tip type - https://www.zimple3d.com/zimpure/). The outlet fits a common vent pipe. You can use this filter (https://www.thingiverse.com/thing:3774613) in terminal output. The hole in the box is made with a bell of 55m or 60mm with insulation. I added silicone seal on both sides of the fan box and on the legs resting on the box to reduce any vibrations.
Statistics
Likes
6
Downloads
0