Pickle EVO2 nano MK2 : nano HD 3 inch quadcopter frame
Description
If you like my work please consider following/subscribing to my feeds : [Instagram](https://www.instagram.com/ledrone.club/) and [YouTube](https://www.youtube.com/c/ledroneclub) Or you can [support me via ko-fi](https://ko-fi.com/ledroneclub) Available on Armattan Productions : * [Cinematic / NanoHD version](https://armattanproductions.com/pages/kit_detail/2546) * [True-X version](https://armattanproductions.com/pages/kit_detail/2547) ----- Theres a [different version of this concept called Evo2 MK3](https://www.thingiverse.com/thing:3888455) available. Check it out ! Pickle Evo2 MK2 Nano is a micro quadcopter frame fitting 3 inch propeller and focused on nano HD cameras. It's a classic micro but made light. Last version of the bottom plate is stiff enough to make it airworthy. **NEW : TrueX or Cinematic (props out of view) base plate. You choose according to your needs** You may follow me on [Instagram](https://www.instagram.com/ledrone.club/) and [YouTube](https://www.youtube.com/c/ledroneclub/) Here are some mind blowing video reviews of this MK2 version of the Evo2. <iframe width="560" height="315" src="https://www.youtube.com/embed/lBChu6RXAS0" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> <iframe width="560" height="315" src="https://www.youtube.com/embed/Ao8hRYid3ug" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> <iframe width="560" height="315" src="https://www.youtube.com/embed/gCoEDRGgjW0" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> <iframe width="560" height="315" src="https://www.youtube.com/embed/cu-5fAzO-9Y" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> [Get some printable accessories here](https://www.thingiverse.com/thing:3888455) like hd camera adapters, standoffs and such kind of gear. The Evo2 frame would probably also fit a 19x19 but that was not the goal of this design :) * 3 inch props (~115mm wheelbase). * Squish layout (props out of camera view). * Dual-plate design with unibody bottom plate. * whoop, 16x16 and 20x20 stacks mount pattern. * 9mm-12mm 4 hole motor mounts. * TPU printed camera mount (14x14/HD format). * Cutout for the USB port of aio boards (no need to flip the board & remap the motors) ## How to get this frame ? #### Armattan productions buy directly the carbon parts here : * [Cinematic / NanoHD version](https://armattanproductions.com/pages/kit_detail/2546) * [True-X version](https://armattanproductions.com/pages/kit_detail/2547) #### Through a CNC service The DIY option, get the frame elements cut at a CNC service. Here are some recommendations. * https://www.cncmadness.com (US/CA) * https://www.ahltec.de (EU) Get the dxf files and send them to the services mentioned above. I recommend to go with a 3mm bottom plate and 1.5mm top plate. You'll need some extra mounting parts for the frame : - 20mm M2 aluminium standoffs (4 pieces) + M2 screws. You also need to get the camera holder printed (TPU should be the best option). ## Recommended setup (the one i'm currently aiming for this frame) - 1105/6 motors - Brushless AIO board (ex : https://betafpv.com/collections/brushless-flight-controller/products/f4-2-4s-aio-brushless-fc-12a-for-toothpick) - Caddx Baby Turtle or [RunCam Split Nano](https://www.banggood.com/RunCam-Split-3-Nano-1080P-60fps-HD-Recording-WDR-Low-Latency-16943-NTSCPAL-Switchable-FPV-Camera-For-RC-Drone-p-1528561.html?p=SI190238022477201908) HD cameras - TBS Crossfire Nano - TBS Unify Pro32 5G8 VTX ## Changelog * 2109-10-08 * The corrected base plate seems to be stiff enough now (Thanks Dave_C_FPV for the inputs) * 2019-08-26 * Base plate upgraded to v1.3 (added cutouts for the USB port of AIO boards) * 2019-08-23 * Added the MK2/nano version
Statistics
Likes
116
Downloads
0