Compact Chisel Sharpening Jig
Description
EDIT: I updated both the STLs and the pictures to the new version. This one is slightly shorter and has a cutout for chisel handles at the back. ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of projects. I designed this compact chisel sharpening jig to get a consistent angle when I sharpen them. To find the right angle, push the chisel into the clamp until its face is resting flat on your whetstone. I used the sharpie trick to find the perfect distance (https://www.youtube.com/watch?v=8kzGvtX-h8g). This design will accommodate chisels or hand plane blades up to 2in wide. I included clamps for 1in, 0.75in, and 0.5in chisels. If you need other profiles, make your own using the Blank Clamp .step file. The M4 x 25mm bolts can hold up to 3 clamps for storage as shown in the picture. Components: 1x - Body 1x - Right Roller 1x - Left Roller Print as many clamps as you need. 1x - Hex Head M6 x 65mm bolt 1x - M6 nut 2x - Hex Head M4 x 25mm bolt 2x - M4 wing nut 2x - 606ZZ bearing (https://www.amazon.com/gp/product/B075CN43RQ/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1)
Statistics
Likes
351
Downloads
0