Top Ender 3 filament guide
Description
I have added a larger version with trays and an improved slide in bracket to attach to the top rail. File name is filguideV2.stl. It is large so make sure it is centered on your build and your clips give enough clearance for the nozzle. Needless to say, make sure your build plate is as level as possible. Supports are needed .2mm distance. Use the block supports feature in Cura for where the bolt goes in as they are not needed and it will make your life easier. This is a remix. Only slide it in about 1 inch. Decided to make use of the upper real estate keeping more clutter off my desk. I use a bolt with a smooth shank instead of the wheel (no getting stuck) and added a slot to feed the filament through. The original designer did a great job on the original so I just expanded on it. I use a quarter inch diameter bolt but any bolt with a smooth shank that covers the area that the filament will touch and is smaller than the hole will do.
Statistics
Likes
2
Downloads
0