The Microblivion II
Description
ABOUT THE DESIGN =================== The Microblivion II is a Toothpick frame remotely inspired by the Diatone GTB series and my original Microblivion. The 14mm Lite Pod can be found here: https://www.thingiverse.com/thing:3745740 **Key features & improvements:** - Up to 3 inch props - Accessible USB - Extra spot to fix the RX - 16x16 and AIO mounts - Sunk M2 Screws - 9-12mm motor mounts - Weight: 10.5g @100% infill printed in PLA RECOMMENDED BUILD ==================== - Motors: 1103 - 1105 7000 - 8000kV like the [T-Motor F10](https://www.banggood.com/custlink/mm3vZIeBtS) - FC/ESC: [GEPRC 12A AIO](https://www.banggood.com/custlink/vv3KtyEpbF) Be careful to read the manual! The VTX ground must be connected directly to the battery ground since the solder pad next to the 5V only takes 0.2A - VTX: 400mW [Eachine Nano](https://www.banggood.com/custlink/Dv3vSKQymq) Really does 400mW! Tested it myself with an RF meter - Camera: [RunCam Nano 2](https://www.banggood.com/custlink/KDDmImAR3G ) The best nano cam in my opinion - RX: [FrSky XM](https://www.banggood.com/custlink/KGK3pTFafy) fits perfectly inside the frame. Works good enough for a micro https://youtu.be/R6iGmFruj8U
Statistics
Likes
333
Downloads
0