Spool winder for Dremel
Description
Spool Winder for Dremel 3D printers ================= Winder to attach your empty Dremel spools to an electric drill so that you can wind on refill and third party filaments. Also see my manual spool winder [Thing:3918099](https://www.thingiverse.com/thing:3918099) I have published a suitable spool holder for the source filament spool here. [thing:3823334](https://www.thingiverse.com/thing:3823334) If you use filament refills rather than spools, I have published a Masterspool which will print on Dremel here. [thing:3786341](https://www.thingiverse.com/thing:3786341). Printing -------- This is best printed in PLA a bit hotter than usual, so that you get good adhesion of the layers. If you must print in a plastic which does not bond well, such as ABS then there is a hole to take an optional M4 x 50mm machine screw to strengthen the layers forming the threads to reduce the chances of them snapping off. If your printer prints a thick first layer (as mine does) then you may need to trim the edge of the hole in the base with a knife before inserting the drill bit. This is designed to be a tight fit and may need a gentle tap with a hammer to insert it. It should be a tight enough fit without gluing. My Dremel 3D Printer Things ============== * Spool winder for Dremel spools [Thing:3793381](https://www.thingiverse.com/thing:3793381) * Manual spool winder [Thing:3918099](https://www.thingiverse.com/thing:3918099) * Dremel compatible spool. Standard size [Thing:3922866](https://www.thingiverse.com/thing:3922866) * 1Kg Filament in Dremel 3D45 Solution #1 [Thing:3818976](https://www.thingiverse.com/thing:3818976) * 1Kg Filament in Dremel 3D45 Solution #2 [Thing:3835745](https://www.thingiverse.com/thing:3835745) * MasterSpool for filament refills [Thing:3875917](https://www.thingiverse.com/thing:3875917) * Build Plate for Dremel 3D45 [Thing:3851463](https://www.thingiverse.com/thing:3851463) * Nozzle Box, 9 - 27 larger nozzles [Thing:3831799](https://www.thingiverse.com/thing:3831799) * Spool Holder [Thing:3823334](https://www.thingiverse.com/thing:3823334) * Filament Guide Wheel for Dremel 3D45 Printer [Thing:3806514](https://www.thingiverse.com/thing:3806514) * 80mm Air Filter for Dremel 3D45 [Thing:3802160](https://www.thingiverse.com/thing:3802160) * 15 Labels for Filament [Thing:3786182](https://www.thingiverse.com/thing:3786182) I design these things for myself but I have published them for you. If they make your life easier or save you money then please do not forget to "Tip Designer"!
Statistics
Likes
130
Downloads
0