Silicone Sock Mould for Slice Mosquito Hotend
Description
This is a mold for making Silicone Sock insulators for the Slice Engineering Mosquito heater blocks. There's currently 3 varieties posted depending on the kind of nozzle you're using and the style of sock you want: - Slice: Made for the Slice Engineering nozzle. Covers the nozzle except the very tip - E3D: Made for the E3D OEM nozzle. Covers the nozzle except the very tip - Ken's Custom: This version should work with either nozzle, and leaves a hole for the nozzle instead of covering it You'll need a high-temperature silicone to work with, either a two part mixture, or an RTV single part will work. [I used this kind](https://goo.gl/ud9dpR) Other supplies: - Latex gloves - Disposable bowl/dish - Dish Soap - 2x M3 12mm screws - Optional but very helpful: [1½" Ratcheting C-Clamp](https://www.amazon.com/IRWIN-QUICK-GRIP-Handi-Clamp-4-59400CD/dp/B00005RHP0/) Check [this post](https://www.thingiverse.com/thing:2848281#tips) for instructions on how to use this mold **Check out my other socks for other hotends:** - [Version 1 - CR-10 Stock Hotend](https://www.thingiverse.com/thing:2848472) - [Version 2 - CR-10 Stock Hotend](https://www.thingiverse.com/thing:2879204) - [Version 3 - CR-10 Stock Hotend](https://www.thingiverse.com/thing:3030379) - [OEM E3D Hotend](https://www.thingiverse.com/thing:3728005) - [Clone E3D Hotend](https://www.thingiverse.com/thing:2848281) - [Generic Mk8 Hotend](https://www.thingiverse.com/thing:2848480) - [Generic Mk10 Hotend](https://www.thingiverse.com/thing:2848485) - [E3D v5 Hotend](https://www.thingiverse.com/thing:3040700) - [Promethius v1.1](https://www.thingiverse.com/thing:3550829) - [Lulzbot Hexagon](https://www.thingiverse.com/thing:3471088)
Statistics
Likes
44
Downloads
0