Umbrella Academy
Description
Printed with CR-10 using Cura 4.1 -Filament - Tianse Black PLA -Dimensions: (X) - 115mm (Y) - 115mm (Z) - 6.5mm -0.2mm Layer height -Top/Bottom - 4 each -Infill - 10% Grid -Infill Before Walls - Disabled -Extruder - 210c -Bed - 60c -Retraction - Enabled 4.5mm -Print Speed - 60mm/s -Infill Speed - 60mm/s -Travel Speed - 80mm/s -Acceleration Control - Enabled -Build Plate Adhesion - Brim 5 line -Print Time - 2h 57min -29g / 9.84m
Statistics
Likes
8
Downloads
0