OffAxis Labs Dust Boot
Description
Sweep up the chips with the OffAxis Labs Dust Boot! This dust boot has been specifically designed to clean up the mess on hobby grade CNC routers equipped with a Dewalt DWP611 or Makita RT0701C routers. High quality 3d printed dust collection attachment allows 2-1/2in vaccum hose to be attached to your router. Attachment is quick and simple. Slide the base onto the router and secure with the M5 screw to clamp it in place. The center clearance hole allows the base to slide over the collet nut and the LED lights to shine down on the work piece. Low profile design does not sacrifice z-axis travel. Tool changes are easy because the dust boot does not block access to the collet nut or the spindle lock button. The two piece design makes it easy to remove the hose attachment and base simply by removing the M5 screws. M5x20 screws and brass heat set threaded inserts allow for reliable and repeated removals. The 2in flexible brushes contain the mess allowing the dust to be sucked away. Brushes are also removable making it possible to view the router bit while powerful vacuum continues to sweep away the chips. The brushes are also angled outward so that complete coverage is maintained while the z-axis plunges into the part. If replacement brushes are needed, simply slide in a new brush and trim to length. 3in length brushes are available. Unique cooling channels assist with keeping the router cool. Air from the router's internal fan escapes from below the clamp ring. The vacuum also pulls air thru the router to assist with keeping temperatures down. A locking rib in the internal bore of the base attachment prevents the base from spinning on the router. Compatible with: Inventables X-Carve CNC with Dewalt DWP611 router Shapeoko 3 CNC with Dewalt DWP611 router, Makita RT0701C router, or Carbide 3D router Openbuilds Spindle Mount with Dewalt DWP611 router. 2-1/2" vacuum hose or equivalent. Required Components: M5 brass heat set threaded inserts (https://www.mcmaster.com/94180A361) M5x20mm low profile screw Qty:3 (https://www.mcmaster.com/93070A127) 2in or 3in easy-cut brushes 15in minimum length (https://www.mcmaster.com/7900T5 or https://www.mcmaster.com/7900T2) Requires: Minimum 13mm between router OD and z-axis mounting plate. Specifications: PLA Plastic 2-1/4in(58mm) hose attachment ID/ 2-1/2in(64mm) hose attachment OD Length: 6.4in (164mm) Width: 4.3in (110mm) Head over to my facebook page www.facebook.com/offaxislabs to check out more pictures, videos, and drop a like. Like the dust boot? Say thanks by sending a tip!
Statistics
Likes
102
Downloads
0