Hot swap SATA/SAS drive rails for Dell R510 and similar servers
Description
Should be a replacement for drive caddies with model numbers: F238F/0F238F, G302, X968D, KG1CH. Should fit Dell server models: Dell PowerEdge R720 Dell PowerEdge R710 Dell PowerEdge R520 Dell PowerEdge R510 Dell PowerEdge R420 Dell PowerEdge R410 Dell PowerEdge R310 Dell PowerEdge R415 Dell PowerEdge R515 Dell PowerEdge T330 Dell PowerEdge T430 Dell PowerEdge T630 PowerVault MD1200 PowerVault MD1400 PowerVault MD3200 PowerVault MD3200i PowerVault MD3400 PowerVault MD3600i PowerVault MD3600f **Note that these rails do not lock - these were meant for a server that is racked and not getting touched or moved -- if you have a production datacenter where things get moved, or shipped around, you should buy actual caddies instead of crap you print off the internet!** Modeled based on existing drive blank plus some iteration. Pegs snap into drive screw holes; handle attaches to rails with two countersunk M3x8mm screws ([like these](https://www.ebay.com/itm/100Pcs-M3x8mm-Thread-Phillips-Flat-Head-Countersunk-Bolts-Screws-F3P1-CS/123662903471?epid=3005157506&hash=item1ccae228af:g:BagAAOSw1~Ncc0RB)). You can probably just ziptie the handles on if you want. [The CAD itself is available here](https://cad.onshape.com/documents/7c6a62e9420787964361285d/w/54599cc644923f7d9c5b1e09/e/5c00cdb85f8c5847daa31a1a). Print rails pegs-up, print handle handle-up. Note that left and right rails are NOT symmetrical.
Statistics
Likes
31
Downloads
0