QIDI Tech 1 - Glass Bed Clip
Description
I recently did a glass bed upgrade to my QIDI Tech 1 and although my bed sticks good when it heats up for PETG (90c) it can slide with enough pressure. I created these to slide onto the nut on the bottom of the bed and to just square the glass bed so I can make sure i do not run into any issues. I printed these in PETG with one support where the C clip is just incase. You could print these with PLA seeing as the bed never heats up that hot but i would think with use the pla would warp.
Statistics
Likes
9
Downloads
0