Ultimate Guard Super Hive 550+ Deck/Token Storage (REV 2.0)
Description
UPDATE: 15/08/19 Ironically my first print failed, stupid auto resume function not working! However it printed enough to test dimensions and realised i was 10mm off across the small and large caddy's. All new versions now uploaded with increased depth, thinner walls and adjusted length. Also added Lids for the caddy's but these arent tested yet. Currently printing small caddy now. Also had some lifting on one corner so now printing with a brim. Launch - 13/08/19 Ive had the UG Super Hive 550+ for a while and used many different deck boxes in the main compartment but found it annoying rifling through so many boxes. I wanted to create something that is modular and can accommodate a range of different cards games, dice and tokens and that can accessed instantly. This is my first pass with a 3 section design that will accommodate ten decks, dice and tokens. Ive not printed this yet so feedback is well received. I hope to create some more with different compartments for a variety of game systems. The large caddy has 4 slots at width 38mm which should accommodate sleeved MTG decks. The small caddy has 6 slots at width 25mm which should accommodate SW Destiny or Keyforge Decks. The small slots should also hold up to 12 SW Destiny Dice. The Token caddy has been left deliberately vague to accommodate a range of tokens and dice as required. According to CURA the Large caddy should take 22hrs to print at 0.2, small is 17hrs at 0.2 and token caddy is 8hrs at 0.2.
Statistics
Likes
3
Downloads
0