Multicolor Cactus Lamp
Description
Hi everyone, this is my "Cactus Lamp". The print is really easy and I hope you'll like it. Instruction: - "1_Cactus.stl", print with 0% infill and no bottom layer. The wall thickness must be 1.6 mm (you can rotate it 45° if your printer is not big enough, as I have done); - "2_Plant_Pot.stl", you can print it normally (infill and wall as you want); - "3_Joint.stl", you can print it normally (infill and wall as you want). NO SUPPORTS ARE NEEDED! Thank you, good printing!
Statistics
Likes
137
Downloads
0