Glass Dagger TES IV Oblivion
Description
“Stand true, my friend. May your heart be your guide and the gods grant you strength."―Uriel Septim, 3E433. Yet another one of ‘my’ uploads! This time it is a glass dagger from the 4th sequel of The Elder Scrolls game series. The mesh was designed by Bethesda Studios back in 2005/2006 and ripped by me from the Oblivion.bsa file in the game directory. As for all my game props, I use the ORIGINAL game mesh. Only necessary editing was done by me. For example; some seams, alignment joints and a small modification to the little glass bulb on the back. ------ Printing instructions: NOTE: I used lime green translucent PETG from Devil Design for the ‘glass’ parts 1: Print the two separate grip halves. DO NOT MIRROR! I used 12% infill and 0.2mm resolution 2: Print the pommel vertically. I used 12% infill, 2 walls and a 4mm brim 3: Print the Glass bulb vertically (SCALE 98%) I used 2 walls and 0% infill for optimal transparency 4: Print the rain guard vertically. I used 8% infill, 2 walls and a 4mm brim 5: Print the two parts of the blade vertically. I used 0% infill, 2 walls and a 4mm brim Assembly instructions: 1: Sand the halves of the model for better glue adhesion 2: Sand or file down the alignment pins for easier assembly 3: Glue all the parts together (I used commonly available PVC glue for my PLA parts. It dries quickly and is rock solid!) 4 (optional): Prime the model and paint it to your liking or according to the added original texture. 5: Post that make, guys!! Check my profile for more Elder Scrolls daggers.
Statistics
Likes
39
Downloads
0