Sapphire V6 Nimble Mount
Description
This is a mount to fit the Zesty Nimble with an E3D V6 Hotend on the TT Sapphire S. Its based on parts of the MGN BLV Project ( https://www.thingiverse.com/thing:3382718 ) and parts desigend by ZestyTech for the BLV. Please note, that you loose about 3mm in Y due to the Coverdesign! Change bed meassurements in the Firmware to avoid collisions! 2nd Note! If you dont use the parts by ChrisKissling to raise the X/Y Steppers and get rid of the Motor-shafts you loose even more in Y because of the upper bearings of the shafts. Print all parts with >90% infill, except the Cover with the FanDucts for this is about 30% infill enough. I prefer PETG. For Part-Cooling you need 2 4010 Blower Fans, and for the Hotend cooling you need a 40x40x10 normal fan. I prefer Sunon they have enough airflow and are still relatvely quiet. If you have any questions, feel free to contact me. Thanks to @BenLevi and @ZestyNimble
Statistics
Likes
11
Downloads
0