Updatet Prusa MK3's R4+ parts
Description
Current: 7 parts I have here a small collection of parts that have been edited by me. A few parts were only optically adapted, in others a few small bugs fixed and a few were extended in their function. All parts are compatible with the standard MK3s R4 original parts set. These parts are mainly meant for converting to MK3s, which you can replace the original of the kit with them. It will probably be more parts over time, so you should always look over. --------------------PART LIST-------------------- Extruder Cover R4+: The melt problem has been resolved, it is recommended to print with ABS or high temperature filament. FS-Cover R4+: The lid of the printhead was adapted only optically, since it looks terrible in the current R4 version and not harmonized with other parts. X-Carriage R4+: A few minor bugs have been fixed and the optics in the upper area have been adjusted to the cover. X-Carriage Back R4+: Here are a few changes made to the cable management as a change in geometry and stability. Y-Motor-holder R4+: The current R4 holder has been extended by a motor shaft bearing to make it more even and straighter. Needed baering MR105 5x10x4mm (dxDxB) Z-Screw-Cover R4+: These covers I have adapted to the modified R4 Z-motor holder, as they have become thicker but the caps were not adjusted by Prusa. One I have provided with a special design.
Statistics
Likes
11
Downloads
0