Ashford Spinning Wheel Bobbin
Description
I designed this bobbin for a friend who has a home-made spinning wheel. The machine was designed to use an Ashford Traditional Bobbin. This bobbin was intended to be used with double-drive, however it should work with scotch tension as well. If you are using this with double drive, it has 2 speeds on the same end for easy switching. To make the bobbin, you will need to print both ends and connect them with a piece of 1/2 -inch CPVC pipe. 4 1/4 inches long. Use a bit of SuperGlue to secure the ends. If you find this project useful please leave me a comment. Or submit a build. Don't forget to check out my other projects.
Statistics
Likes
19
Downloads
0