4 inch fredstyle drone
Description
This is my 4 inch fpv frame. I did use a 20x20 fc. I have two frames: - one with standoffs printed on the frame, to secure the fc with servo screws (small screws) - and a frame with 4 holes to use m2 standoffs to secure te fc The only problem is the hole for the usb cable insert that isn't correct then. So print 4 extra standoffs instead of the left and right side. Motors: I did use 2204 2300kv motors. I think this is not ideal for 4 inch but i used what i had. Camera: The camera that I used is a 25 mw cam from my old blade inductrix fpv. i also used a STL of my top plate without the mounting holes for the VTX. and I also used an editable DXF file. I made 3 versions of camera holders: 0°, 10° and 20°. I used 10° because i want to fly in tight places, so i don't need a lot of camera tilt. The hole for the lens is 10mm. Screws: - 8 x m3 x 30 mm Countersunk Screws - 8 x m3 nuts have fun and building and flying it yourself! flight video: https://youtu.be/vvNtetmpWBw build video: https://youtu.be/UYirvCw0TGo
Statistics
Likes
27
Downloads
0