Tronxy X5S - Upgrade kit for separated and repositioned X/Y Axis pulleys, Belt Tensioner and Left Spacer
Description
This system is designed to allow the separation and repositioning of the anterior X-Y Axis pulleys on the tronxy X5S. Using it a reallinetation of X-Y Axis belt becomes possible. Shurak's pulleys and Misha T's GT2 Belt Clips are used in this kit. NB.Please test it and share your feedback here so I can optimize the system. thanks What is needed for this upgrade Printed parts 1x Pulley Base Plate Left (part1) 1x Pulley Base Plate Right (part2) 4x Pulleys Support1 (part3) 4x Pulleys Support2 (part4) 1x Stepper Motor Mount Plate Left (part5) 1x Stepper Motor Mount Plate Right (part6) 8x Pulleys (by Shurak https://www.thingiverse.com/thing:2811858) 2x GT2 Belt Clips (by Misha T https://www.thingiverse.com/thing:41756) Screws x8 M3x10 x4 M5x50 (for pulleys on anterior plates, countersunk head cutted as needed) x2 M5x50 (for pulleys on gantry plates) x7 M4x12 x9 M4x10 Washers x16 4.5mm x0.9 x16 5.5mm x1.0 (for pulleys) Elastic Washers x16 stock elastic washers Nuts x16 M4 (T-Nuts) x9 M5 Fixing Elements Cable Ties -------------------------------------------------- Belt Tensioner The Belt Tensioner is designed specifically for the Tronxy X5S and it allows a better management of the X-Y Axis belt tension. Using this tensioner the X printing length is reduced by about 20mm. What is needed for this upgrade Printed parts 2x Belt Tensioner part1 (clips) 1x Belt Tensioner part2 (body) 1x Belt Tensioner part3 (rear plate) 1x Belt Tensioner part4 (front plate) Screws x2 M3x45 x4 M3x20 x1 M5x50 Washers x4 2.5mm x 0.7 x1 5.5mm x 1.0 Nuts x8 M3 x1 M5 Fixing Elements Cable Ties ------------------------------------------------ Left Spacer The Left Spacer is a spacer designed to allow the realigneation of the X-Y Axis belt on the left of the hotend gantry on the tronxy X5S. What is needed for this upgrade Printed parts 1x Left Spacer Body (part1) 1x Left Spacer Fornt Plate (part2) 1x Left Spacer Rear Plate (part3) Screws x2 M3x15 x2 M3x45 x1 M5x50 Washers x4 3.5x0.7 x2 5.5mm x1.0 Nuts x4 M3 x1 M5 Fixing Elements Cable Ties
Statistics
Likes
24
Downloads
0