Ruixin Pro Clamp Base (For Updated and upgraded version of Ruixin Pro with Clamp)
Description
This is a Spacer plate that fits into the bottom of the Knife clamp holder to mount it on the Ruixin Pro Sharpener system (Upgraded version with Clamp) that can be bought on AliExpress or Ebay. See link - https://www.aliexpress.com/item/32956547212.html I have found some of the clamp bases slightly smaller than others, so if need be, just use some sand paper to sand the sides slightly until it fits in tight and perfect. NOTE : If you want to use my Fine Tuning adapter, then check out the link below. Be sure to select your 8mm or 7mm size vertical rod and select the file with the "Extension Tube" to be able to clear and not interfere with one of my other designs, the Guide Rod Holder. https://www.thingiverse.com/thing:3644585 Some more of my designs: https://www.thingiverse.com/leadingedge/designs If you find my designs useful, please go ahead and click on "Tip Designer" to the right of the photos at the top of this page. Proceeds will be used to purchase printing filament so I can keep designing and testing cool new things that you might find useful. Thank you!
Statistics
Likes
4
Downloads
0