Front Hubs 2mm, 2.5mm, and 3mm Diameter Steering Arm for Direct Steering and Suspension
Description
Depending on what ball joints/ servo saver you end up buying for the Direct Steering/ Suspension systems, you will need a different diameter mount. I remixed the right and left hub to have a 2mm, 2.5mm, and 3mm diameter hole on the steering arm. Each is centered on the same point. Steering characteristics, from the steering arm at least, should be the same. Picture (if it decides to actually work) is of my remixes of the Upper and Lower 2017 BOM by Rabenauge (https://www.thingiverse.com/thing:3816035) and Daniel Noree's 2017 Front Chassis (https://www.thingiverse.com/thing:3815775).
Statistics
Likes
9
Downloads
0