Redcat Gen8 Roof Rack
Description
Used the dimensions from the Gen 8 Roof Rack that Redcat made and remade it entirely. this one is slightly beefier and has better mounting and print-ability. Shouldn't need supports and should be able to withstand most light rollovers. The original was weak and difficult to print. I forgot to invert it before export, so you'll have to flip it and print it upside down. I did not angle the mounting surfaces for the gen 8 like Redcat did so it can be used for universal applications. I have not printed this as of Publish so let me know what problems you have. Holes are 2mm exactly.
Statistics
Likes
16
Downloads
0