TBS SourceOne - Complete set of lite-weight accessories
Description
About *** This set of accessories is intended to be used with **TBS Source One** frame **v0.2** and **v0.3**. **New!!** 06/04/2020 - added Video Antenna protector and two models for protecting ESC 12/09/2019 - updated arm protection and mini camera support to help improve printing Follow *** I also post pics and videos of my designs on [Instagram](https://www.instagram.com) as [madxfpv](https://www.instagram.com/madxfpv) It includes *** - T-antenna mount (works with both Crossfire Immortal and FrSky R9) - GPS Mount for BN220/TBS M8 and Matek M8Q GPS (two separate versions) - RX Tray for CrossFire Nano, R-XSR, R9MM or other RX of about 20x12mm in size - Camera mount for mini-cameras w/ adjustable angle, designed to minimize jello effect - Chin protection for the bottom plate with and without triangle extension - 2in1 arm protection and motor soft mount - Easy removable VTX antenna protector - Two liteweight ESC protector models Previous version *** My previous set of accessories for this frame was designed to provide full protection for electronics and ESCs, but although ideal for bando they were pretty heavy on the quad. So I decided to make a lite-weight version, that could be used in any scenario. https://www.thingiverse.com/thing:3628153 Related parts *** I've created separate posts for parts in this set, follow them if they suit you: Video Antenna: https://www.thingiverse.com/thing:4200656 ESC: https://www.thingiverse.com/thing:4203359 Description *** This set is designed to be lite-weight and durable at the same time. The camera mount is designed to avoid jello effect and has an adjustable camera angle from 0 to 55º with four screws mount. The GPS mount is set on the back of the quad and has support for BN220, TBS, and Matek GPS modules. An RX Tray is provided to mount the receiver far away from the VTX and also has a 40º guide for hooking up the video antenna. The Arm protection also has a 0.75 mm soft mount for the motors and is designed to fit v0.2 and v0.3 arms. The Source One arms for the v0.1 frame will not work with this unit. How to print *** All the parts must be printed out of TPU or Nylon (w/ 0.2 or 0.25 layer height) and should have at least 30-40% infill. For any suggestions, please leave a comment. Happy flying.
Statistics
Likes
36
Downloads
0