Pipe mount
Description
A quick print (50 min for 2), can be sliced for 1/2 time. One part is for a 1/2 inch copper pipe with a soldered cap (slightly larger than OD of 1/2 copper piping. The other is for the diameter of a water hammer arrestor. Each have a single screw mount. My print settings were 40 on inner walls, 100 infill and 60 print speed. 30% infill geometric, Print material was red ABS, 80 degree print bed, 245 degree print head (i think..). Happy to answer any questions.
Statistics
Likes
0
Downloads
0