Sonnof PowR2 Mobile application
Description
I've made this enclosure to be able using my tasmota flashed Sonoff pow R2 modules in temporary places. The first edition i use to monitor the power consumption of my electric scooter while charging. <b>Additional Feature:</b> the stl called manipulator could be used for slicing manipulations in the LED´s area for make them shine trough by leaving infill. I've done this easy with Prusa Slicer2. The building should be self explaining. The cable insert is made to fiddle in a cable tie and prevent the cable to get ripped out. <font color= #FF0000><b>WARNING This is not a reference for electrical rules and safety in your country. In doubt ask an approved electrician to wire and build this item proper! </b> <b>Downsides?</b> Not approved to used outdoors in the rain. Due the German Euro socket limited to country's with same system. Sure there are other versions of sockets sold with the same mounting dimensions. I found an US version that may fit : https://www.amazon.com/Waterproof-Generator-Socket-Receptacle-Grouding/dp/B01M0J4XS0 <b>Additional material:</b> 4 Allan Key screws m3x30 + nuts 1 panel mounting socket Type 11011 Mennekes (aMozan e.g) PCB of a sonnof PowR2 - keep the screws for later 4 countersink screws 4x 16 + nuts
Statistics
Likes
15
Downloads
0