IKEA OMLOPP Clip for 3030 extrusions
Description
This clip can be used to mount a 40cm long OMLOPP light onto a 3030 aluminium extrusion. The clip can be snapped into to groove of the OMLOPP light's case. I don't know how hot the light gets after hours of operation. So you should use PETG to print the CLIP. The narrow version positions the OMLOPP with its frontmost lower corner above the extrusion corner. The wide version positions the backmost lower corner a little bit before the extrusion corner, so you can attach other 3030 extrusions on top without the OMLOPP touching them. NOTE: If the clips does not snap in you need to file the straight side of the hook a little bit thinner.
Statistics
Likes
2
Downloads
0