Fleshmachine Stroker SexToy - NSFW

Description

This is my take on a Fleshlight Stroker which i called the Fleshmachine. I was inspired by Simon Chiller's Fleshlight Stroker, but it was loud and not very powerfull. This is why i used a linear rail setup which i found pretty cheap on Aliexpress (~23 Euros). I designed the Clamp to hold the Original Fleshlight. I also re-purposed the Fleshlight Showermount, so you can attach the whole thing to a Table, or wherever... It works pretty good and also has an alternating speed. Parts List: 1x Arduino Nano https://aliexpi.com/DuRY 1x DRV8825 Stepper Driver https://aliexpi.com/6usk 1x Optical Endstop Switch https://aliexpi.com/F1Na 1x Funssor DIY linear rail motion guide kit 100mm travel https://aliexpi.com/fMRP 1x DC Power Supply Socket and Jack Set https://aliexpi.com/i3Dk 1x 12V Switch https://aliexpi.com/LFwS 1x Fleshlight Showermount 1x 12V Power Supply 1x 100µf Capacitor 11x Screw M3x6mm 6x Screw M3x10mm 4x Screw M3x20mm 1x Screw M3x35mm 11x Nut M3 Parts to Print: 6x T-Nut 1x Controlbox 1x Controlbox-Lid 1x Endstop-Case 1x Endstop-Case-Lid 1x Endstop 1x Clamp-Top 1x Clamp-Bottom 1x 2020-Adapter 1x Adapter-Suctioncup Update: I added 2 Screwable Mounting plates that you can use instead of the Suctioncup

Statistics

Category

Tags