Z-tensioner for Artillery Sidewinder (SW-X1)
Description
I quite successfully applied this (https://www.thingiverse.com/thing:1010672) bearing in my project, but did not indicate this as a remix, because it is optional and is not the main irreplaceable part. For example, you allways may use metal 608RS. https://www.thingiverse.com/thing:973209 - Similar: You can use a different mandrel on the bearing I attached the Cura 4.2.1 profile, as well as the g-code right away, which you could simply print on your Sidewinder artillery using PETG if your nozzle is 0.4 mm My tensioner works well if you move it with the bearing as close to the Z axis as possible. Then the tension increases!
Statistics
Likes
164
Downloads
0