Pi Zero IR Cam Case
Description
This is a case for a Pi Zero and an Infrared Camera, there are two versions, one for the regular lens (15mm) and one for the wideangle lens (17mm). The Pi zero can run MotioneyeOS in order to build a very affordable and customizable infrared camera, more on: https://github.com/ccrisan/motioneyeos/wiki The optional stand can be used to set the camera at a 10° angle, however the angle can be changed using M5 screws to tap into the stand. There are openings on the back for improved passive heat radiation, and the Pi can simply be dropped in, no screws required. The camera module is then held in via the lid. Care was taken to prevent any sharp bends in the ribbon connecting the camera to the Pi. Constructive criticism is always appreciated :)
Statistics
Likes
17
Downloads
0