Open Bench Logic Sniffer (OLS) Case
Description
This is for the Open Bench Logic Sniffer (OLS) that I bought long time ago and wasn't been used until recently. I do not see one that I like, so here's mine. The revision of my board is v1.01, but most likely will fit other revs of the board. It's a snap fit case and no screw is required. http://dangerousprototypes.com/docs/Open_Bench_Logic_Sniffer I did not print the uploaded version, since I only need one case. The first case I printed requires some minor adjustments, so I fixed those before uploading the files and should work fine. [Final update] After I soldered down the headers, I saw the 2 header cut off are off centered 0.5~0.9mm, so I shifted the holes a bit to the left and uploaded as the v2. Also I can't get the Sigrok(win64 nightly build) to recognize this OLS(should be supported), please comment if you know how to get that to work. Maybe the Sigrok only works with the newer boards? https://sigrok.org/wiki/Openbench_Logic_Sniffer
Statistics
Likes
2
Downloads
0