Ender 5 Bed Support - Easy to print!
Description
These printer arms significantly reduce the bed shaking that can occur with larger prints. It also helps with bed sag during large prints. You may need to turn off adhesion options in Cura to get the arm to fit on the bed, it's pretty big. You may be able to use a skirt with a small offset from the arm. The hole in the arm is for a zip tie. You can secure the arm to the bed this way so that it won't move over time. Nuts and bolts: 18-8 Stainless Steel hardware, $13.17: https://www.mcmaster.com/91292A197 - screws, $4.14 per pack of 10 https://www.mcmaster.com/93475A240 - washers, $2.57 per pack of 100 https://www.mcmaster.com/93625A200 - nylon insert lock nuts, $6.46 per pack of 100 Black oxide screws and zinc plated steel hardware, $10.38: https://www.mcmaster.com/91290A268 - screws, $3.37 per pack of 25 https://www.mcmaster.com/91166A240 - washers, $2.42 per pack of 100 https://www.mcmaster.com/90576A104 - lock nuts, $4.59 per pack of 100
Statistics
Likes
167
Downloads
0