Okhotnik Speed Wing
Description
This is a collection of parts for a 30" fpv racing wing. The intent is for a very fast and stable 6s racing wing. Hot-wire templates are included in the files. They consist of a 9" MH70 aerofoil root, a 7" MH60 middle panel, and 5" MH44 for the tip. I hot-wired mine out of pink rigid insulation foam (Fomular 150 - 1.5"). The motor mount slots on to the back of the wing and can be retained with glue. Rear most spar should be 20mm forward of the trailing edge. 2X M3 through holes mount standard or small base quadcopter motors to the mount (16mm C-C) The camera pod is designed to fit Micro format cameras and the Caddx Turbo S2, Foxeer Falcor Micro, and Foxeer Monster Micro have been confirmed to fit. Just tip the camera in and pack foam behind it from the cameras packaging. Carbon Spars and lamination film are recommended for construction, and elevon size and shape are relatively free form. Follow the layout diagram and adhere to the suggested CG location. To layout dimensions or modify the wing, visit the link below to the eCalc CG page; https://www.ecalc.ch/cgcalc.php?deeplink=SBach%20342%20(Example);in;9;7;5;0;0;0;4;12;0;0;0;5;10;0;0;0;d;17.5;17.5;24.5;14;12.6;0;0;0.75;3;4;0;4;7;24;1;0;88;25;10; Standard wing/quadcopter components are suggested below: Battery: 4s 1550 - 6s 1000 Motor: 1800kv-2450 kv (2306 or 2207 minimum) ESC: 30-40A Propeller: APC 4X4.5 - APC 5.5X5.5 - APC 6X4 Servos: 9 Gram Metal Gear FPV: Optional/User preference. Micro Camera Required to use with included mount
Statistics
Likes
40
Downloads
0