Gazelle Power Supply Batter Charger Enclosure
Description
The AC-Cable-plug of the battery charger was broken, therefore I soldered the cable directly on the connection pins on the PCB. The enclosure is not watertight and even not protected against splash water. Disclaimer: You alone are responsible for the changes on electronics and its equipment/enviorment. Working on PCBs should only be executed by trained persons. To fixate the base part and cap, you could use the snap-function. Anyway, I suggest to also attach 2x M3 screws for better fixation. The cable needs to be fixed with hot-glue and a cable tie. See picture for reference. I do not know, whether this enclosure is also suitable for other chargers. I used the enclosure for: - Article Number: 993002100 // Model: BSA4300200
Statistics
Likes
2
Downloads
0