TonUINO 5 by itchyro
Description
Case for TonUINO (https://www.voss.earth/tonuino/) with 5 buttons (needs dev fork of the TonUINO sketch). Designed for 3" speaker (Visaton vs-frs8 m) and Arcade Buttons (24 mm). The design was inspired by vonwe, who made a nice minimal case for a 3 button TonUINO (https://www.thingiverse.com/thing:3136804). The frame for the RFID is from reinholdeins (https://www.thingiverse.com/thing:3042687). You may want to check his case for nice 3 button design. The frame for the Tonuino PCB is from an adjusted version of nik101968's Arduino nano support (https://www.thingiverse.com/thing:1418427) You will need 8 m4 screws. 4 for the speaker, 4 for the case. You should test the cover with just a few mm printed first, to see if it fits the case and then reduce or enlarge it slightly. For me it worked at 100%. Please give me feedback, how the print and assembly worked for you.
Statistics
Likes
15
Downloads
0