Post printing Part Cooler for Maker with multiple Glasbeds, Mirrors etc.
Description
To reduce Cooldown Time (3 Printers wich 2 Glasbeds each) i designed this Thing. Using a 120mm 12V Fan and Aluminiumtube 8x1mm. Holes for the Tubes designed to use a 8mm H8 Hand Reamer after printing. So the Tubes fit strong without Glue. Size of this "Cooling Table" fits for Glasbeds from 220x220 up to 330x330mm. For any other Size just change the Lenght from the Tubes. Im my Case they are 250 and 95mm. To reduce the Noise i used Silicone Feets under the Corner Parts. A .stp File is included.
Statistics
Likes
2
Downloads
0