camera stabilizer gimbal
Description
camera stabilizer remixed from https://www.thingiverse.com/thing:672295 bearings were moved to outside to allow better tightening and assembly without zip ties. bearings are 4x 625z. 1 inch bolts with dab of hotglue on end of threads or some locknuts, diy can be made with vice and hammer with a smack. also use a jet lighter on the plastic if you have issues with the center ring getting the bearings in. https://www.thingiverse.com/thing:84142 used the camera mount from here and there are some video's of another similar setup.
Statistics
Likes
18
Downloads
0