Nerf Artemis Stock Adapter
Description
Shoulder Stock Adapter for Nerf Rival Artemis Allows Artemis Blaster to mount Nerf N-Strike/Modulus Stocks. Installs by replacing the sling mount, additional support via 5mm bolt hole (need to drill blaster shell) Chose to go with a large bolt instead of using the existing screw holes on back of blaster, because: easier to source larger nut/bolt hardware, no risk of stripping tiny Nerf screws in plastic threads hardware needed: 5mm bolt x22mm long (approx 3/16"diameter x 7/8"long for non-metric) (longer is OK) threading pitch doesn't matter, whatever's convenient washer nylock nut drill hole in blaster shell, goes into rear of topmost magazine tube; recommend doing a fit-check and using the adapter pieces as a hole guide use BoltSupport piece inside of blaster shell to provide a flat clamping surface. Shouldn't interfere with magazine spring and follower; protruding nut/bolt fit into hollow follower piece (back plate of magazine should be removed from blaster and bolted to adapter; then reassemble as a unit)
Statistics
Likes
44
Downloads
0