Atari Falcon030 CT60e Bracket
Description
This is a bracket for an Atari Falcon030 computer with the CT60e 68060 accelerator card and a picoPSU power supply. It sits under the CT60e and slots into the PSU slots on the motherboard, and fills the empty IEC inlet and power switch holes on the back on the Falcon case. In the former IEC inlet space are now holes for the picoPSU +12V input, a CT60e power button, and a 68030/68060 toggle switch. The former power switch space is left available for future expansion. The +12V input hole (the lowest of the three) should work for any picoPSU (and perhaps for similar tiny ATX power supplies if they use the same size input), but the other two holes may require customisation to fit your own power button and switch. A [fully customisable version](https://www.tinkercad.com/things/4zUrsvfUdot) can be found on Tinkercad. **Update 12.09.2019**: I've improved the design of the feet so that the legs of the Falcon top case now hold the bracket in place when the case is screwed together. This also positions the top case legs at the same height as they would be with a factory PSU installed. (The previous version of this bracket allowed the case legs to rest on the motherboard, 1 mm lower than their standard position.)
Statistics
Likes
2
Downloads
0