Adjustable Twist Lock Hanger System
Description
This Thing is an adjustable hanging bracket system. It consist of a Base that you mount to a wall, board, or whatever and your own custom designed bracket to do whatever it is you want it to do (within reason). The base is screwed to a wall or some vertical surface. Then you load the bracket and twist it to lock it into place. The brackets are designed by you since only you know what you want. The file Adjustable_Hanger_1 is a blank of the bracket lock that you can use to design what you need. I provided the files in both stl and step format so you can use the whatever design software you want. I also included 2 hanger brackets as examples that were designed to hold one of my airsoft guns. I would not use this for heavy book shelves, but for gun racks, knicknack shelves,tool hangers, etc... it should be fine. It is not going to be as strong as a dedicated shelving braces but as long as you limit the weight it should support quite a lot. Here is a video of the twist lock: https://youtu.be/Yc_x-0Rqf_Q EDIT 9/6/2019 I added photos of how I am using this system for my airsoft collection. I also want to let you know that you need to be careful when twisting the hangers onto the base. Be sure to align it so that both fingers go into the base at the same time, it is easy to be off a little bit and then it will not turn and lock. On my printer this is a tight fit which I wanted so they would stay in position. EDIT 9/8/2019 I added additional hangers for tools, jewelry, etc...
Statistics
Likes
13
Downloads
0