Air Wolf 3D XL Dual extruder.
Description
I Converted My Air Wolf 3D Xl To A Dual Extruder Machine Way Back In March. I Thought I Could Sell Conversion Kits, But I Have Too Many Other Things Going On In My Life So I Decided To Share It With Everyone. The Design Of The Carriage Is More Compact Than The Original Since The Extruders Are Remotely Feed So You Get The Same Build Width In The X Direction And A Little Bit More In The Z. The Plexiglass (5Mm) 1/2 Enclosure Was How I Mounted The Spools And Extruders, But You Can Do That However You Want. Enjoy. This Is Still A Work In Progress Because The 8Mm Hobbed Bolt Drive Is Too Small Of A Diameter To Work Effectively With A Tube Type System. I'Ll Eventually Convert My Extruders To A Bowden Style Setup And Update My Firmware With The New Ratios. It Works With The Smaller Extruder Drive, But I Have To Limit My Retractions To Keep The Drive From Stripping The Filament. The Penalty For That Is Excessive Ooze From The Inactive Nozzle.
Statistics
Likes
13
Downloads
0