Turret cover
Description
This cover can be used to cover the turret of the Diabase H-series. The cover is designed to support a second of extruders. It's design consists of 5 parts that allow you to easily swich to a different configuration for the second row of extruders. To mount the cover to the turret, per piece you will need four m3x30 bolts. Two covers can be connected together using four m3x10 bolts. Note that you will have to thread all holes with a 2.7mm diameter using a M3 tap. Depending on the print quality of your printer you may also have to drill out the holes to make the bolts go in smoothly.
Statistics
Likes
0
Downloads
0