Mendal Dual Printhead Carriage
Description
If Anyone Wants The Raw Files Let Me Know Or I Can Add In One That Fits Your Printer Better. This Is A Printhead To Fit Metal Case Printer. It Is An Off Brand But Some Parts Are Similar To The Medal Prusa. Printer Has Two Horizontal 8Mm Rods 60Mm Apart From Outside Of Rods. 52Mm On Center. Made For E3D Hot Ends, One Side Is Shifted To Made The Two E3D Printheads Fit On The Platform Better. Also There Are Mount Holes For A 40 Mm Fan On The Bottom Of The Print. The Channel Under The Head Mount Works To Direct The Airflow Nicely. Also I Have A Center Gt2 Mount Clamp. Printhead_V5 I Made A Few Changes Since V4 Version, I Had Some Little Alignment Pieces For The Lm8U Bearings, But After Installing Noticed They Really Didn'T Need To Be In There And Just Made The Print Messy. Also Tightened Up The Printhead Mounts Some, It Worked, But Caused Some Print Quality Issues.
Statistics
Likes
1
Downloads
0