8x8 pan divider
Description
Designing, printing and using a divider for the 8x8 pans I use for pre-freezing some food for freeze drying. The pans were labeled 8-by-8 inches, but are actually 7″-by-7" at the bottom which works out well; the freeze dry trays we have are 7″-by-17 1/4". By putting a 1/2" wide divider in the middle of the pan I end up with two 7″-by-3 1/4" pieces. I can then use two 7″-by-7" and one of the 3 1/4" pieces the fill the pan perfectly. 2-07-21 Added a version with gussets because the original ones were weak where the upright parts meet the bottom part. (snap, oops, glue) Also added just the gusset file in case you already printed some and wanted to strengthen them; that's what I did. I have not printed any of the new ones yet. The magnets are 8mm x 3mm
Statistics
Likes
3
Downloads
0