Chiron total mod - BIG ENCLOSURE for 2 printers
Description
This is 1:1 model of big enclosure for Anycubic Chiron and I3 Mega and filament storage. All measurements are same as in my enclosure. Chiron is stuck inside. To remove it You need to first remove profile on side. Printer have around 5-10mm free space on each side (include full table movement) so its tight. Materials used: 10 meters aluminium profile 4040 type "used" (60€) 46 conectors L type 90* (40€) 10mm plywood for floor 5x (30€) 4 whells with breaks 360* rotation (15€) 4x10cm steel profile 45x45x2 (for wheels) (10€) 14 hinges for glass (special type) (20€) 6 meters of aluminium profile for LED strips (10€) 5 meters 5050 type 72W LED strips (10€) 1kg of spherical head screw M8x16 and flanged M8 nut (5€) 3.75 square meters of policarbon 4mm (front) 3mm (sides) (~80€) Cost around 280€ Idea in general is great but cost is high. But it will looks great. Everything is in one place easly visible.
Statistics
Likes
51
Downloads
0