![Palette 2 to Zesty Nimble Mount, Bolt-On, Modular](https://3dcrawler.ams3.digitaloceanspaces.com/thingiverse/3850039-Palette-2-to-Zesty-Nimble-Mount-Bolt-On-Modular-2469024227.png)
Palette 2 to Zesty Nimble Mount, Bolt-On, Modular
Description
Modular Mosaic Palette 2 tube adapter/mount for a Zesty Nimble extruder mounted on a stock Creality CR10/Ender3/Ender5 setup. Bolts in place with provided Nimble bolts. Use washers for best results. Note that the Nimble motor tube clamp will not rotate into the bolt position, so rotate it counterclockwise by 120 degrees when you re-install it. See the orientation in the first photo. Fusion360 file is provided for the bolt-on mount. I'm still a beginner so it is a bit wonky from a design perspective, but it fits, it is sturdy in PLA, and it leaves enough room to access the breech. The grommet tube and the hole it fits in might need some light sanding to fit, but it should be snug when inserted. The grommet tube can be removed - as shown in the pictures - when not running filament through the Palette 2. The Palette 2 grommet tube is the medium length one found here: https://www.thingiverse.com/thing:3262585 . There you can find a shorter - or longer one as well, if you prefer - they will fit in this mount.
Statistics
Likes
7
Downloads
0